

Brainfuck comes to mind
Brainfuck comes to mind
If you don’t need a laptop, I’ve been having a blast with using mini/micro/tiny business PCs off of eBay. I’ve had zero issues installing Debian on them, and they’re designed to be easy to maintain by IT departments, so Wi-Fi, storage, RAM, and even CPUs are all replaceable. They are mobile CPUs, so if you need the heavy lifting of desktop CPUs, you’d probably need to go with a larger form factor.
Check eBay for used business micro/mini/tiny PCs. They’re pretty cheap, and low power consumption. They’re mostly Intel processors, so that’s what you make of it. If I were you I’d look for i3 processors 9th gen and up, i5 and i7 8th Gen and up for transcoding. They can hardware transcode pretty much anything but AV1, vp9, and hevc 12bit but the processors are powerful enough that they can transcode those to x265/264 to a device or two using the CPU without issues.
If you don’t plan on transcoding, I’ve had no issues with a 5th Gen i5 NUC doing server things, but I do offload any processor heavy things to my 7060 micro (8th Gen i7) machine if I want it done quickly.
Ahkshually, they’ve only had 6 birthdays. They’re still 24 years old.
As mentioned many times I’m sure, I use my rpi’s as a pi-hole/VPN. It’s nice having them as dedicated devices for low power things, if my main server ever fudges up, my VPN still works and internal DNS is still resolved. If I’m not home and get complaints from the family that jellyfin isn’t working, I can either fix it remotely or wake up my dev server for them to use in the meantime.
I also have an rpi 1 as a “dedicated ssh machine” that I can ssh into in case all of my other machines have gone goofy. If for any reason my two main devices aren’t accessible, that one will be because if there’s power to the house it will turn on. It does literally nothing else, so there’s very little chance a power outage will corrupt anything. It does require that the pivpn device is working if I’m not home, but I prefer to leave that to it’s own …devices.
This one gave me the confidence to post my setup, I salute your bravery (°_°)7.
The best of luck with your future insurance claim.
Uggo = uptime
I would think that the power led would be on if there’s power going through the motherboard.
Are you referring to the power led or the disk usage led? I think on my nuc the only other led is the disk usage one, which looks like a soda can. The power led is always on, but doesn’t indicate standby or operating as far as I’ve seen.
It’s likely there’s another boot device that’s taking priority over USB, if USB is even enabled in the bios. I’ve had a few computers that try to pxe boot after internal drives, so it never went to usb until I futzed with the boot order to remove pxe. It’s likely not that you didn’t have an SSD in it, but that USB drives aren’t high enough on the boot list, or not at all. You could try finding what the boot selection key press is on boot, then blindly picking first, second, third option etc. to see if anything gets a hit (frantically press boot key during start up then hit enter after a few seconds, then reset and do it again if nothing happens after about 30 seconds, but hit down, then enter.)
I don’t keep a Swiss army knife set of distros anymore. I put tumbleweed on a USB. It’s rolling so I update it when I plug it in, then do what I need to do.
I used to have a USB with Ubuntu LTS and whatever the newest Ubuntu was. Then another would get something else that I needed/wanted. I always ended up wiping the drive and adding the newest release every single time. I was always out of date by the time I needed one of them for boot repair or something. This was also a time when persistence… Wasn’t very persistent. With tumbleweed I can install whatever I need and it’s there next time. I’m sure you can do the same with any other rolling release, but tumbleweed is in my opinion on par stability-wise with incremental distros. It’s my first grab whenever I need to check a PC. If I need another distro or boot USB, I can make it from this one with a second USB. I suppose the only thing I can’t do is make a bootable USB if the computer I’m on can’t access the Internet
You don’t need to pop it out to DD the SD card, you can do it while it’s running. I like to pipe DD through gzip to get a compressed image as the output so I’m not sitting on 16gb file for 3gb worth of files.
With my step kid I’ve basically just told him I’m not making anything else for him if he doesn’t like what I made. If he won’t eat it, he can have fresh vegetables and/or last night’s leftovers instead. I give him some options before I start cooking, so he knows and has some say in what dinner is.
The exception is if I make something that’s objectively gross. I’ve had a few frozen package dinners that looked good but were outright nasty and made sandwiches instead.
I hate to admit that I love using these micro business computers, but they’re pretty awesome. Stackable, powerful, upgradeable, cheap second hand or refurbished. I’ve considered nucs, but you can find buckets of these for cheaper.
What’s worse is most of what comes up isn’t even a hands on review, it’s literally someone doing what I just did, which is type “vacuum cleaner” into Amazon and see what came up. Then they give it reviews based on the bullshit in the description.
I want a review from someone who sees these everyday and has a deep hatred of every vacuum in existence. He’s the one who knows that such and such used to be good until they replaced this part with plastic because they have a new CEO, and now it’s no better than a dirt devil.
At least with vacuums however, there’s a few guys out there with carpet swathes, children, and dogs at home that get to take vacuums from work and do youtube tests with them. Unfortunately they usually don’t try to game the algorithm so they’re pretty deep in there.
Did you do the nextcloudpi install?