Port forwards in the router + DynDns.

Though those leaks showed they actually did it on a large scale. I don’t think they stopped for some arbitrary reason. Why would they? And technology developed further, surveillance is only getting easier. I’d say even without a tin-foil hat on, it’s more likely they do it than not.

Well, centralization and giving up your freedoms, letting someone else control you, is always kinda easy. Same applies to all the other big tech companies and their platforms. I’d say it applies to other aspects of life, too.

And I’d say it’s not far off from the usual setup. If you had a port forward and DynDns like lots of people have, the Dns would automatically update, you’d need to make sure the port forward is activated if you got a new router, but that’s pretty much it.

But sure. if it’s too inconvenient to put in the 5 minutes of effort it requires to set up port forwarding everytime you move, I also don’t see an alternative to tunneling. Or you’d need to pay for a VPS.

Ah, nice. Alright. Thanks again. I’ll see how I can do it. Unfortunately I’ve already set everything up, joined Rooms and connected a few bridges. I hope it doesn’t break. I’ll do a backup first. Seems reasonable and not that hard to upgrade.

Oh well, seems both reasonable. Maybe I should switch before the projects diverge too much. Conduwuit seems pretty active. Hope it stays that way.

Do you happen to have a link where I can read the backstory myself? Thanks for the info anyways. Seems to be a good call.

I found that. Seems it mainly addresses caching and database performance, adds some admin and moderation commands. I’m not sure if it addresses any of the shortcomings I have.

My main question is: Which one is going to be maintained in the years to come and have the latest features implemented? And secondly: Why a fork? Why don’t they contribute their fixes upstream to Conduit?

Ah, well I only read the official documentation on https://docs.conduit.rs/

I’m gonna take a look at this later.

Depends a bit on how much images and videos get shared. If its mainly used for chat by a bunch of people and a few gifs and stickers in-between, it shouldn’t consume that much storage. But sure if you frequently share all your vacation photos, the cache is going to grow fast.

Definitely the whole server name. Other servers and clients can’t guess that information. I think it’s properly documented how to do it.

I installed it like 2 weeks ago. As of now it’s still running and has a really low memory footprint compared to Synapse. But a lot of things aren’t implemented. Chatting works fine. I get a lot of warning messages about not implemented things, though. Like my client (FluffyChat) trying to query some profile status … I’d say try it. I’ve done so. But I can really only give some good advise after a few more weeks of using it. Maybe there is a dealbreaker.

Seems the two German supermarket chains really like to have the same infrastructure everywhere. Everywhere I go the Aldis look exactly the same. They have slightly different products depending on the country. But the price tags, interior, … is basically the same. Okay and we don’t have “Flaschenpfand” everywhere… (deposit on the plastic bottles and the machines where you can return bottles.) I bet all of this makes it a lot easier for their techs and management. And it could also explain why they sometimes redo a store that still looks fine and fit it with the latest shenanigans.

And as an aside: I’ve shopped in the first Aldi store ever. It’s not far from where I live.

Nice, didn’t know about HomeBox. Are there other good inventory systems for home use?

They’re already widely adopted in supermarkets here (Germany).

Yes, you’d damage the car’s electrical system. First of all it’s not designed to feed in energy through that outlet. It’s made to output energy.

And most importantly: 24V is way too much. 2 times the intended voltage would fry most electronics. Your stereo, the power steering, airbags, … There is a good margin and car electronics are designed to be pretty robust, but you’re pushing it.

I think they’re still fine because what happens is your car battery absorbs that extra voltage. But it’s really dangerous. On a sunny day you’ll charge your car battery beyond the 14V or so the chemistry can handle. And at that point it’ll degrade fast. The acid in there is going to start to boil, producing hydrogen, so in addition to a destroyed battery, you’re in for a small explosion if you’re very unlucky. And once the battery is gone it’ll start frying the cars electronics because now there isn’t anything keeping the voltage down.

Get a switch that exclusively connects either the car or the solar panel to the bluetti. One switch that switches between two things, not an On/Off switch. And make sure it’s rated for the current.

Edit: Or a relais that toggles between both. It can switch if there’s power on the 12V rail, and connect the bluetti to either or.

You could also try the ROCm fork of KoboldCpp

Koboldcpp bundles an interface ontop of llamacpp. And generally it’s relatively easy to get it running.

And cosmos-cloud.io too.

I think you mentioned the major ones. I don’t think I’d give any of them perfect score. But I’ve had a look at most of them. And I’ve been using YunoHost for years.

I’d really like to have something that I can recommend to people, without any downsides. Maybe for small businesses, too. Or non-profits / clubs etc who need a mailinglist and a Nextcloud.

We probably need one super popular self-hosting solution. With SSO so it’s simple to invite friends. Atomic / A/B updates so it’s indistructible. Backups preconfigured and a Marketplace with 1-click installers. Backed by a non-profit or nice community and non-commercial.

As of now all advice here is kinda missing the point or wrong… (Exept the one recommendation to do updates ;-) I wouldn’t use Cloudflare as it’s really bad for freedom, watches your traffic and most interesting things aren’t even in the free/cheap plans… You can’t restrict connections to the “Established state” or you can’t ever connect to your server… And SSH is a safe protocol. Just depends on the strength of your passwords… And yeah, opening ports is never 100% safe. Neither is using computers. They can be hacked but that’s not helping… And I’d agree using Wireguard or Tailscale would help. But you already said you don’t want a VPN…

I didn’t have a proper look at the Forgejo Docker container. I’d say it’s safe. It’s probably using keys instead of passwords(?!) I hope they configured it properly if they ship it per default. And it’s running sandboxed in your Docker container anyways and not running a system shell on the machine.

The issue with SSH is, there are lots of bots scanning the internet for SSH servers and testing passwords all day. Your server will be subject to a constant stream of brute-forcing attempts. Unless you take some precautions. Usually that’s done by blocking attackers after some amount of failed login attempts. This is either preconfigured in your Docker container (you should check, or watch the logs.) Or you’d need to use something like fail2ban on top. Or ignore the additional load and have all your users use good passwords.

(What I do is use Git over https. That worked out of the box while ssh would have required additional work. But I also have lots of other ports forwarded to several services on my home-server. Including ssh. No VPN, no Cloudflare … I have fail2ban and safe passwords. I’m happy with that.)

It depends on the exact specs of your old laptop. Especially the amount of RAM and VRAM on the graphics card. It’s probably not enough to run any reasonably smart LLM aside from maybe Microsoft’s small “phi” model.

So unless it’s a gaming machine and has 6GB+ of VRAM, the graphics card will probably not help at all. Without, it’s going to be slow. I recommend projects that are based on llama.cpp or use it as a backend, for that kind of computers. It’s the best/fastest way to do inference on slow computers and CPUs.

Furthermore you could use online-services or rent a cloud computer with a beefy graphics card by the hour (or minute.)

Sure. I think with LVM you have decoupled your partitions from their physical location on the disk. You could shrink and move logical volumes around, make some (free) space for a new one and install a new distro on it. Or just replace the PopOs root with a new operating system.

As I remember it’s not super easy but there are quite some wiki articles about LVM and guides on how to shrink/change LVM volumes including the filesystem inside. LUKS+LVM+ext4 is a pretty common scenario.

However… Having a Backup of important data is always a good idea. Especially when playing around with partitions and filesystems. And more so if you don’t exactly know what you’re doing.